:::: MENU ::::

Tutorial: Our Josephine Sews… A Square Zipped Cushion

Bus Cushion

The zip is a marvellous invention, and sewn neatly it gives a really nice finish. There are many methods for inserting a zip and every sewist has their own take on it. Why not give this method a whirl and see if it suits you.

You will need:

  • Cushion Pad
  • Fabric of your choice – I’ve used the spectacular Cath Kidston bus print!
  • Zip foot
  • General Sewing Paraphernalia

1. Cut the front and a back piece of fabric to 4cm wider and longer than your cushion pad. Your zip can either be the exact same length as the sides of your square cushion, or shorter; often I find that I use whatever I’ve got in my stash. You can always cut your zip shorter if need be.

2. Put your fabric right sides together, pin along the bottom edge, lay your zip on top and mark the start and end of where the zip opens. Move the zip out of the way and sew using a 2cm allowance; start with a regular length stitch, changing to a tacking stitch at your first marking and again switching to a regular length stitch at your second marking.

3. This may seem a bit counter intuitive but we are going to sew each side of the zip separately. This should enable you to sew with more precision.  Fold your fabric so just the raw seam is on the right and the rest of the fabric is to the left. Open your zip and pin the right side face down along the seam with the teeth in the centre. Change to your zip foot and sew along the right side of the zip teeth, you should only be sewing through the zip and one side of the seam.

Right side of zip right

 

 

4. Close the zip and repeat on the other side. If you have difficulty sewing past the zip pull, use a seam ripper to open up your tacking stitch and move it past the zip foot. It may be a bit fiddly but you can remove the foot to do this, making sure you keep the needle in the fabric to stop it from moving about too much.

 

other side

5. Unpick your taking stitches to reveal the zip underneath, open it up.

Finished zip

 

6. Pin your fabric right sides together, sew around the three remaining sides with a 2cm seam allowance, finish the sides as you wish and trim your corners and turn right side out. Press, push out the corners and pop in your cushion pad.

bus and train


Comments